3M Controltac IJ180Cv3 Graphic Film with Comply v3 Adhesive
Cast Wrap Film3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.

Briteline
Briteline WrapCAST 2 mil cast wrap vinyl with air egress and low initial tack. Opaque gloss white, up to 7 yr. 54" and 60" x 50 yd.
Briteline WrapCAST is a value-priced 2 mil cast wrap vinyl with air egress and low initial tack. Its adhesive bond builds with applied pressure, so panels can be positioned and repositioned easily, making it manageable even for a single installer. The 100% opaque white film has a high-gloss finish and is rated up to 7 years.
WrapCAST handles flat, riveted, simple-curve and compound-curve surfaces and is optimized for consistent print quality with latex, solvent, eco-solvent and UV-curable inks. It suits vehicle wraps and fleet graphics where you want cast-film conformability at a lower price than the 3M and Avery flagships.
Note: the manufacturer warns that low-initial-tack films are not ideal for print-and-cut lettering with small details. The recommended protection is the matching WrapCAST Overlaminate (not stocked here yet).
| Film | Cast vinyl, white, 100% opaque |
|---|---|
| Thickness | 2 mil |
| Adhesive | Gray, pressure-activated, removable, air-release |
| Liner | Kraft paper |
| Finish | Gloss |
| Core | 3" |
| Durability | Up to 7 yr |
| Print compatibility | Latex, Solvent, Eco-solvent, UV-curable |
| Application surfaces | Flat, Flat with rivets, Simple curves, Compound curves |
| Recommended laminates | Briteline WrapCAST Overlaminate |
| Not recommended for | Print-and-cut lettering with small details |
| Width | 54" |
| Roll length | 50 yd |
| Sub category | Cast Wrap Film |
Specifications shown for the selected option (54" x 50 yd).
The HP Latex 570 is a 64" roll-to-roll printer, so this 54" or 60" roll loads normally. The manufacturer lists latex inks as compatible; use the film maker's HP Latex media profile (or the closest HP generic preset for this film type), let prints fully cure, and run a test panel before production.
It is a 2 mil cast vinyl wrap film.
The manufacturer says low-initial-tack films are not ideal for print-and-cut lettering with small details.
It is rated up to 7 years.
The recommended overlaminate is Briteline WrapCAST Overlaminate.
3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.
3M IJ280 2 mil cast print wrap film with Comply v4 air release. Up to 20% faster installs, lifts 2x less. Pairs with 3M 8428G. 54" x 50 yd.
3M IJ180mC-10 2 mil cast print wrap film with micro Comply adhesive for a smooth finish. Removable, up to 10 yr. 54" x 50 yd roll.
Avery Dennison MPI 1105 EZ RS 2 mil SuperCast wrap film, slideable air-release adhesive, up to 7 yr. 54" and 60" x 50 yd rolls.