3M Controltac IJ180Cv3 Graphic Film with Comply v3 Adhesive
Cast Wrap Film3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.

Avery Dennison
Avery Dennison MPI 1105 EZ RS 2 mil SuperCast wrap film, slideable air-release adhesive, up to 7 yr. 54" and 60" x 50 yd rolls.
Avery Dennison MPI 1105 SuperCast Easy Apply RS is a 2 mil, removable, highly conformable cast film built for vehicle wraps and complex curves. Easy Apply air-release technology plus a repositionable slide (RS) adhesive let installers position large panels precisely before committing, and the film is rated up to 7 years outdoors.
It is a strong choice for fleet graphics, full wraps and watercraft; Avery also lists floor graphics, smooth wall graphics and opaque signage as applications. The gloss white film prints with latex, solvent, eco-solvent and UV-curable inks and has excellent dimensional stability for cutting and converting.
Important: Avery specifies that MPI 1105 must be paired with a DOL 1000Z, 1300Z or 1400Z series overlaminate. Those laminates are not stocked in this shop yet, so plan your laminate before ordering. If you would rather laminate with ORAGUARD 290 or 293 that we stock, look at ORAJET 3951RA instead.
| Film | Cast PVC (SuperCast), white, opaque |
|---|---|
| Thickness | 2 mil |
| Adhesive | Gray, acrylic, pressure-activated, long-term removable (Easy Apply RS) |
| Liner | 90# StaFlat |
| Finish | Gloss |
| Durability | Up to 7 yr outdoor |
| Print compatibility | Latex, Solvent, Eco-solvent, UV-curable |
| Recommended laminates | Avery DOL 1000Z series, Avery DOL 1300Z series, Avery DOL 1400Z series |
| Applications | Vehicle wraps, Fleet graphics, Watercraft graphics, Floor graphics, Smooth wall graphics, Opaque signage |
| Width | 54" |
| Roll length | 50 yd |
| Sub category | Cast Wrap Film |
Specifications shown for the selected option (Avery Dennison MPI 1105 SuperCast Film – Easy Apply RS 54" x 50 yd).
The HP Latex 570 is a 64" roll-to-roll printer, so this 54" or 60" roll loads normally. The manufacturer lists latex inks as compatible; use the film maker's HP Latex media profile (or the closest HP generic preset for this film type), let prints fully cure, and run a test panel before production.
Yes. Avery states MPI 1105 must be paired with DOL 1000Z, 1300Z or 1400Z series overlaminate.
RS is Avery's repositionable slide adhesive: the film can be slid and repositioned before pressure is applied.
Up to 7 years outdoor durability per Avery Dennison's rating.
Avery lists latex ink compatibility and both roll widths fit the 64" 570. Use Avery's or HP's media profile and test first.
3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.
3M IJ280 2 mil cast print wrap film with Comply v4 air release. Up to 20% faster installs, lifts 2x less. Pairs with 3M 8428G. 54" x 50 yd.
3M IJ180mC-10 2 mil cast print wrap film with micro Comply adhesive for a smooth finish. Removable, up to 10 yr. 54" x 50 yd roll.
Briteline WrapCAST 2 mil cast wrap vinyl with air egress and low initial tack. Opaque gloss white, up to 7 yr. 54" and 60" x 50 yd.