3M Controltac IJ180Cv3 Graphic Film with Comply v3 Adhesive
Cast Wrap Film3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.

3M
3M IJ280 2 mil cast print wrap film with Comply v4 air release. Up to 20% faster installs, lifts 2x less. Pairs with 3M 8428G. 54" x 50 yd.
3M Print Wrap Film IJ280 (Controltac with Comply v4) is 3M's newest premium wrap film. 3M says it is up to 20% faster to install, proven to lift 2x less, conforms with less heat, and removes cleanly with heat at end of life. It is a 2 mil cast, luster white film rated up to 10 years and backed by the 3M MCS Warranty when used as a matched system.
IJ280 handles flat, riveted, corrugated, simple and compound curves, concave surfaces and deep channels, which makes it ideal for fleet, transit and full vehicle wraps as well as watercraft. The Comply v4 air-release pattern is designed for maximum airflow and a smooth finish.
3M pairs IJ280 with 3M 8428G gloss overlaminate. We do not stock 3M laminates here, so request 8428G with your order. If you already run IJ180Cv3, IJ280 is the upgrade path when faster installs and lifting resistance on deep channels matter.
| Film | Cast PVC, white, opaque |
|---|---|
| Thickness | 2 mil |
| Adhesive | Gray, solvent acrylic, pressure-activated, removable (Comply v4) |
| Liner | Polyethylene-coated paper |
| Finish | Luster |
| Durability | Up to 10 yr |
| Print compatibility | Latex, Solvent, Eco-solvent, UV-curable |
| Application surfaces | Flat, Flat with rivets, Corrugated, Simple curves, Compound curves, Concave, Deep channels |
| Recommended laminates | 3M 8428G Gloss Overlaminate |
| Applications | Vehicle wraps, Fleet graphics, Transit graphics, Watercraft graphics |
| Width | 54" |
| Roll length | 50 yd |
| Sub category | Cast Wrap Film |
The HP Latex 570 is a 64" roll-to-roll printer, so this 54" roll loads normally. The manufacturer lists latex inks as compatible; use the film maker's HP Latex media profile (or the closest HP generic preset for this film type), let prints fully cure, and run a test panel before production.
3M pairs IJ280 with 3M 8428G gloss overlaminate.
IJ280 uses Comply v4; 3M claims up to 20% faster installs and 2x less lifting, and it carries a 10 yr rating versus 7 yr for IJ180Cv3.
3M states it removes cleanly at end of life with heat.
Latex inks are listed as compatible and the 54" roll fits the 64" 570. Use a 3M/HP profile and test.
3M Controltac IJ180Cv3 2 mil cast wrap film with Comply v3 air release. Up to 7 yr removable. 54" and 60" x 50 yd rolls for latex printers.
3M IJ180mC-10 2 mil cast print wrap film with micro Comply adhesive for a smooth finish. Removable, up to 10 yr. 54" x 50 yd roll.
Avery Dennison MPI 1105 EZ RS 2 mil SuperCast wrap film, slideable air-release adhesive, up to 7 yr. 54" and 60" x 50 yd rolls.
Briteline WrapCAST 2 mil cast wrap vinyl with air egress and low initial tack. Opaque gloss white, up to 7 yr. 54" and 60" x 50 yd.