Duratex
Duratex 13oz Double-Sided Smooth Banner
Duratex 13oz double-sided smooth blockout banner, opaque, NFPA 701. For pole and hanging banners seen from both sides. Use platen protectors on latex.
$402.06
Duratex
Duratex 8oz Mesh Banner with Liner
Duratex 8oz mesh banner with removable liner, 70/30 air flow for fences, scaffolds and windy sites. 500x1000 denier, reverse wound. 54" x 164'.
$317.14
SKU DTXMESH541648L
In stock
Orders over $10,000 are paid by bank wire or ACH only.
Is it right for your job?
Best for
- Fence and scaffold banners
- Building wraps
- Windy outdoor locations
Not for
- Close-view indoor graphics
- Blockout double-sided banners
Overview
Duratex 8oz Mesh Banner with Liner is a lightweight polyester-scrim mesh for windy locations. The open weave lets air pass through (70/30 air flow), reducing wind load on fences, scaffolds and building wraps. A removable backing liner makes ink adhesion easier during printing and is peeled off afterwards.
It is reverse wound (print side in), 500 x 1000 denier with an 18 x 12 scrim, for outdoor durability.
The liner matters on latex and other inkjet printers: it keeps ink from passing through the mesh onto the platen. Remove it after printing.
Key features
- 8 oz lightweight mesh banner
- Removable liner for easier printing
- 70/30 air flow reduces wind load
- Reverse wound (print side in)
- 500 x 1000 denier polyester scrim
Specifications
| Banner type | Mesh, reverse wound, with liner |
|---|---|
| Weight | 8 oz |
| Denier | 500 x 1000 |
| Scrim | 18 x 12 |
| Air flow | 70/30 |
| Color | White |
| Print compatibility | Latex, Solvent, Eco-solvent, UV-curable |
| Width | 54" |
| Roll length | 164 ft |
Printer compatibility
The HP Latex 570 is a 64" roll printer, so this 54" roll loads normally; the manufacturer lists latex compatibility. Use a banner media preset or the maker's profile and test. Print with the liner on and remove it afterwards.
Recommended laminate
- Not required
Compare with
- Duratex 13oz Reverse Wound Banner — Solid 13 oz banner
FAQ
Why does the mesh have a liner?
The backing makes ink adhesion easier during printing and is removed afterwards.
How much air passes through?
It has a 70/30 air flow rate.
Is it reverse wound?
Yes, print side in.
More Banner
Duratex
Duratex 13oz Forward Wound Banner
Duratex 13oz single-sided scrim banner, forward wound (print side out), NFPA 701, consistent white point. Indoor/outdoor, no laminate needed.
$190.92
Duratex
Duratex 13oz Reverse Wound Banner
Duratex 13oz single-sided scrim banner, reverse wound, 1000x1000 denier, NFPA 701. Indoor/outdoor without lamination. 54" x 164' roll.
$272.25
Duratex
Duratex 15oz Double-Sided Smooth Banner
Duratex 15oz double-sided smooth blockout banner, matte, 300x300 denier, NFPA 701. Premium hanging banners. Use platen protectors on latex.
$440.99