3M Scotchcal IJ8624 Graphic Film for Textured Surfaces
Wall & Textured Surface3M Scotchcal IJ8624 2 mil cast film for textured surfaces like brick, block, stucco and tile. Removable, up to 7 yr. Pairs with 3M 8524. 54" x 50 yd.

3M
3M Scotchlite IJ680CR 7 mil printable reflective film with Comply adhesive. Night visibility for fleets and signs, up to 9 yr. 48" x 50 yd.
3M Scotchlite IJ680CR is a 7 mil flexible, enclosed-lens retroreflective graphic film with a slideable, pressure-activated adhesive and air-release channels. It returns headlight light toward the source for night-time visibility, with a typical coefficient of retroreflection of 100 and excellent angularity. 3M rates it up to 9 years, and it removes with heat and/or chemicals.
Use IJ680CR for commercial vehicle, rail and bus graphics, fleet markings, sign graphics and striping on flat, riveted and corrugated surfaces. 3M notes that certain ASTM and NFPA standards apply; check them for emergency and regulated vehicles.
3M recommends 1920DR, 8518, 8519, 9740i and 9760LX for protection. For a lower-priced printable reflective, compare Briteline Reflective.
| Film | Cast, enclosed-lens retroreflective, white |
|---|---|
| Thickness | 7 mil |
| Adhesive | Clear, pressure-activated (Controltac, Comply air release) |
| Liner | Polyethylene-coated paper |
| Finish | Luster |
| Reflectivity | Engineer grade; typical coefficient of retroreflection 100 |
| Durability | Up to 9 yr |
| Print compatibility | Latex, Solvent, Eco-solvent, UV-curable |
| Application surfaces | Flat, Flat with rivets, Corrugated |
| Recommended laminates | 3M 1920DR, 3M 8518, 3M 8519, 3M 9740i, 3M 9760LX |
| Applications | Fleet and commercial vehicle graphics, Rail and bus graphics, Sign graphics and striping |
| Width | 48" |
| Roll length | 50 yd |
| Sub category | Reflective |
The HP Latex 570 is a 64" roll-to-roll printer, so this 48" roll loads normally. The manufacturer lists latex inks as compatible; use the film maker's HP Latex media profile (or the closest HP generic preset for this film type), let prints fully cure, and run a test panel before production.
3M lists a typical coefficient of retroreflection of 100 with excellent angularity.
It removes with heat and/or chemicals.
3M notes certain ASTM and NFPA standards apply; check the 3M product bulletin for your application.
3M Scotchcal IJ8624 2 mil cast film for textured surfaces like brick, block, stucco and tile. Removable, up to 7 yr. Pairs with 3M 8524. 54" x 50 yd.
Briteline holographic rainbow film, 6 mil printable with permanent clear adhesive for stickers and window decals. Short-term use. 60" x 100'.
Briteline MultiGRIP 14 mil non-slip textured PVC for floor and wall graphics, no anti-slip laminate needed, removes clean. 48" x 100'.
Briteline 5 mil printable reflective vinyl, permanent adhesive, ASTM D4956 Type 1. Reflective decals and fleet markings, up to 7 yr. 48" x 150'.
Briteline translucent printable vinyl, 3.2 mil matte white with even light diffusion for sign cabinets and lightboxes. Up to 5 yr. 54" x 150'.
General Formulations 234 GraphiTex, 7 mil matte polyester fabric with repositionable removable adhesive for painted walls. Up to 10 yr. 54" x 100'.
Magnum MuscleMag Latex 15 mil printable magnet with extra-strong hold, HP certified for Latex 300 series. Outdoor rated 1 yr. 48" x 50'.
Rad Grafix printable wall vinyl, 6 mil matte calendered film, removable up to 1 yr without wall damage. Murals and decor. 54" x 150'.